Blog

Ceiling and Wall Panel Install

Material List: UltraTouch Radient Barrier insulation 3M High-Strength 90 spray adhesive 1/4" Cabinet Grade Plywood 1/2" Plywood 12 and 14 Gauge Extension Cord 1/4-20 stainless button head cap screws (used 2" and 1") Steel Cross Nuts Once we had established our floor plan, and started to frame the walls and cabinetry, it became evident that we were … Continue reading Ceiling and Wall Panel Install

Advertisements

Huntington Beach State Park

We made a break for a 4 day weekend looking for a late fall beach getaway. Our destination for this outing was Huntington Beach State Park near Murrell's Inlet, South Carolina. The journey began on a Wednesday afternoon, and we headed off to our fist stop: the Crackell Barrell "RV Resort" near Lake Marion, Santee, … Continue reading Huntington Beach State Park

Cabinetry: Why We Built Our Own

Material List: 1/2" plywood 1/4" plywood 1x4 finish boards Kreg Jig Pocket Hole System Kreg Pocket Hole Screws Kreg Square Driver Bit Plusnuts and Bolts Pistons/struts We very seriously considered buying unfinished cabinets and modifying them to fit, but the weight was going to be a concern. We also would have to modify them to … Continue reading Cabinetry: Why We Built Our Own

Insulating The Walls

Material List: UltraTouch Radient Barrier insulation 3M High-Strength 90 spray adhesive R-30 Unfaced Fiberglass insulation It's important to note that we live in the southeast, and weather fluctuates a lot; however, we don't experience harsh winters. We wanted to be sure our camper was insulated well enough to help regulate the temperature, but we didn't feel that … Continue reading Insulating The Walls